Golf remaining distance measurement application New operation explanation (app name @ GolfGpsN)
1. Contents of the application
-This app measures the distance between two points based on the GPS value of the measurement point and the latitude and longitude of the registered golf course hole green center (revised version).
・ For improvement points, the distance to all holes is displayed. 30 rounds (30 outs, ins. Or 30 golf courses, courses, vents, korai, etc.)
2. Procedure
・ Measure and input the latitude and longitude of the green center (may be near) using Google Maps, Google Earth, etc. (From the layout drawing of each golf course, check vent and Korai. Enter the two green vents with the left side as vent.)
・ Basically, you can go back by pressing the bottom button.
・ In addition, please use this application outside the house to use GPS. Also, it may take a minute or two to display the correct value.
・ 30 (golf course or round) registration is possible (course and green types can be registered separately).
3. Screen description
・ 1, Screen (displayed by numbers in the upper left of the screen, menu screen)
(1), button to register course data
・ Press to enter course name, course type, green type and green latitude and longitude data.
(2), registration course selection button
・ Press to register the latitude and longitude of the course and measure the remaining distance. .
・ 2, screen (registration screen for golf courses, etc.)
(1) New registration of golf courses, etc.
-Enter a golf course or the like in the input field and press the "Registration button" (eg, Otaki, Asagiri) within 30.
・ Do not enter the same golf course.
-When the "list button" is pressed, the registered golf course and the like are displayed together with the ID.
・ If you make a mistake, enter the ID, and if you make a correction, press the “Modify button”.
(2), Course name registration
・ Enter the course name and press the “Registration button” (eg, East, Out).
・ The rest is the same as (1)
(3) Registration of green type, etc.
・ Enter the green type, etc., and press the “Registration button” (eg, vent, main).
・ The rest is the same as (1)
(4), "Go to course selection" button
・ After completing the three registrations, press the "Go to course selection" button to go to the course selection.
・ 3, screen (list of registered golf courses)
・ 4, screen (course name list)
・ 5, Screen (Green type list screen)
・ 6 、 Screen (Registration selection screen for golf course etc., scrollable)
(1) Select and touch 1, 1, golf course, etc., 2, course, 3, green grass, etc.
・ 7, Screen (Latitude and longitude registration)
(1) Enter the latitude and longitude of the green center of the course
-1, 1, golf course, 2, course 3, green grass type, etc. selected on the 6 screens are displayed.
-The latitude and longitude of the green center of the course are measured separately for vents and korai using the Google map, Google Earth, and the layout of the course to be imported. (The latitude / longitude is not the number of minutes and seconds, but the number with a decimal point.)
(Example: 35.123456 (degrees), 140.234567 (degrees) do not input, only numbers)
-Register the latitude and longitude from the 1st to 9th holes. (In the case of inn, number 10 to 18)
・ To make corrections, press the "Browse button", store the ID of the golf course to be corrected, press the "To correction" button, enter the ID on the correction screen, and press the display button to correct the corrected part And press the Modify button.
・ After registering, press the “Menu” button to return.
・ 8, screen (registered data such as latitude and longitude are displayed)
・ 9, screen (latitude, longitude, etc. correction screen) scrolling.
-To make a correction, enter the ID on the correction screen, press the display button, correct the correction, and press the correction button.
・ 10, screen (course measurement selection screen)
(1) Select and touch buttons such as 1, golf course, etc., 2, course 3, green grass type, etc.
・ 11, screen (measurement screen) scrolling.
(1) When the "measurement start button" is pressed, measurement is performed. (If the number is too large, wait about one minute and press the measurement button again.
・ Since a recent hole will be the previous hole if it is a short hole, only the next hole is displayed.
・ Below, the distance to the green of all 9 holes is displayed.
1. Contents of the application
-This app measures the distance between two points based on the GPS value of the measurement point and the latitude and longitude of the registered golf course hole green center (revised version).
・ For improvement points, the distance to all holes is displayed. 30 rounds (30 outs, ins. Or 30 golf courses, courses, vents, korai, etc.)
2. Procedure
・ Measure and input the latitude and longitude of the green center (may be near) using Google Maps, Google Earth, etc. (From the layout drawing of each golf course, check vent and Korai. Enter the two green vents with the left side as vent.)
・ Basically, you can go back by pressing the bottom button.
・ In addition, please use this application outside the house to use GPS. Also, it may take a minute or two to display the correct value.
・ 30 (golf course or round) registration is possible (course and green types can be registered separately).
3. Screen description
・ 1, Screen (displayed by numbers in the upper left of the screen, menu screen)
(1), button to register course data
・ Press to enter course name, course type, green type and green latitude and longitude data.
(2), registration course selection button
・ Press to register the latitude and longitude of the course and measure the remaining distance. .
・ 2, screen (registration screen for golf courses, etc.)
(1) New registration of golf courses, etc.
-Enter a golf course or the like in the input field and press the "Registration button" (eg, Otaki, Asagiri) within 30.
・ Do not enter the same golf course.
-When the "list button" is pressed, the registered golf course and the like are displayed together with the ID.
・ If you make a mistake, enter the ID, and if you make a correction, press the “Modify button”.
(2), Course name registration
・ Enter the course name and press the “Registration button” (eg, East, Out).
・ The rest is the same as (1)
(3) Registration of green type, etc.
・ Enter the green type, etc., and press the “Registration button” (eg, vent, main).
・ The rest is the same as (1)
(4), "Go to course selection" button
・ After completing the three registrations, press the "Go to course selection" button to go to the course selection.
・ 3, screen (list of registered golf courses)
・ 4, screen (course name list)
・ 5, Screen (Green type list screen)
・ 6 、 Screen (Registration selection screen for golf course etc., scrollable)
(1) Select and touch 1, 1, golf course, etc., 2, course, 3, green grass, etc.
・ 7, Screen (Latitude and longitude registration)
(1) Enter the latitude and longitude of the green center of the course
-1, 1, golf course, 2, course 3, green grass type, etc. selected on the 6 screens are displayed.
-The latitude and longitude of the green center of the course are measured separately for vents and korai using the Google map, Google Earth, and the layout of the course to be imported. (The latitude / longitude is not the number of minutes and seconds, but the number with a decimal point.)
(Example: 35.123456 (degrees), 140.234567 (degrees) do not input, only numbers)
-Register the latitude and longitude from the 1st to 9th holes. (In the case of inn, number 10 to 18)
・ To make corrections, press the "Browse button", store the ID of the golf course to be corrected, press the "To correction" button, enter the ID on the correction screen, and press the display button to correct the corrected part And press the Modify button.
・ After registering, press the “Menu” button to return.
・ 8, screen (registered data such as latitude and longitude are displayed)
・ 9, screen (latitude, longitude, etc. correction screen) scrolling.
-To make a correction, enter the ID on the correction screen, press the display button, correct the correction, and press the correction button.
・ 10, screen (course measurement selection screen)
(1) Select and touch buttons such as 1, golf course, etc., 2, course 3, green grass type, etc.
・ 11, screen (measurement screen) scrolling.
(1) When the "measurement start button" is pressed, measurement is performed. (If the number is too large, wait about one minute and press the measurement button again.
・ Since a recent hole will be the previous hole if it is a short hole, only the next hole is displayed.
・ Below, the distance to the green of all 9 holes is displayed.
Show More
