Remote Control for Denon
compute4you
3.2 ★
1K ratings
100,000+
downloads
Free
With this remote control app, you can wirelessly control your Denon AV receiver and send MP3 files directly to it. Includes receiver discovery, volume handling, and display data features.
AppRecs review analysis
AppRecs rating 3.2. Trustworthiness 0 out of 100. Review manipulation risk 0 out of 100. Based on a review sample analyzed.
★★★☆☆
3.2
AppRecs Rating
Ratings breakdown
5 star
38%
4 star
11%
3 star
11%
2 star
10%
1 star
30%
What to know
✓
Authentic reviews
Natural distribution, no red flags
⚠
High negative review ratio
40% of sampled ratings are 1–2 stars
About Remote Control for Denon
Control your Denon AV receicer with your Android phone or tablet via Wireless LAN. Every Denon (Marantz) receiver connected to your local network can be controlled.
Features:
* Fast auto discovery of your receiver (must support DLNA)
* Sending MP3 files directly to the receiver (must support DLNA)
* Shows changes made with the original remote control (IR) or directly on the receiver without delay.
* Speaker protection. Volume handling is done like on a real receiver. So immediately switching to maximum volume is not possible.
* Displays data which are shown on the receivers On Screen Display.
* Display dimming setting
* Demo Mode (no receiver needed)
This is the first version so expect further features to come. Seeking in MP3 files not yet supported.
Note:
This App was developed using a DENON AVR 1713.
Compatible devices:
AVR-4311, AVR-4306, AVR-3313, AVR-3312, AVR-3311, AVR-2313, AVR-2312, AVR-2113, AVR-1912
In general all Denon receivers with a network connection should work. However every model has special features not available on others. I cannot test it on every possible model, so if you have special needs for your model please contact me via e-mail.
Have fun.
Features:
* Fast auto discovery of your receiver (must support DLNA)
* Sending MP3 files directly to the receiver (must support DLNA)
* Shows changes made with the original remote control (IR) or directly on the receiver without delay.
* Speaker protection. Volume handling is done like on a real receiver. So immediately switching to maximum volume is not possible.
* Displays data which are shown on the receivers On Screen Display.
* Display dimming setting
* Demo Mode (no receiver needed)
This is the first version so expect further features to come. Seeking in MP3 files not yet supported.
Note:
This App was developed using a DENON AVR 1713.
Compatible devices:
AVR-4311, AVR-4306, AVR-3313, AVR-3312, AVR-3311, AVR-2313, AVR-2312, AVR-2113, AVR-1912
In general all Denon receivers with a network connection should work. However every model has special features not available on others. I cannot test it on every possible model, so if you have special needs for your model please contact me via e-mail.
Have fun.
