AppRecs review analysis
AppRecs rating 3.0. Trustworthiness 79 out of 100. Review manipulation risk 40 out of 100. Based on a review sample analyzed.
★★☆☆☆
3.0
AppRecs Rating
Ratings breakdown
5 star
67%
4 star
0%
3 star
0%
2 star
0%
1 star
33%
What to know
⚠
Questionable review patterns
40% review manipulation risk - some review patterns appear unusual
About Wooden beam
The application calculates the wooden beams of the floor or the covering for strength and deflection according to building codes and norms (SP 64.13330.2011).
Two variants of calculation are realized:
- floor beam;
- free beam.
For calculation, you must specify the initial data, such as:
1. The load is useful.
The standard values are given in SP 20.13330.2011 (Loads and effects), Table 8.3.
For example, for living quarters it is 150 kg / m2.
2. Load from the floor.
It is necessary to specify the composition (pie) of the floor, i.e. Materials and their thickness. If there are wooden logs on the beams, then the load from their weight can be taken into account.
You can also set the load from the floor manually, if it is known in advance.
3. Step beams.
4. Span.
5. Wood species.
6. Wood grade
7. Impregnation with flame retardants.
Indicated for wooden beams subjected to deep impregnation with fire retardants under pressure.
8. Humidity of air.
Humidity of air at which wooden beams will be operated.
9. Height of beam section (h).
10. Beam cross-sectional width (b).
The application is useful in the design and construction of an apartment house, cottage, villa, bath, utility rooms and other buildings.
Two variants of calculation are realized:
- floor beam;
- free beam.
For calculation, you must specify the initial data, such as:
1. The load is useful.
The standard values are given in SP 20.13330.2011 (Loads and effects), Table 8.3.
For example, for living quarters it is 150 kg / m2.
2. Load from the floor.
It is necessary to specify the composition (pie) of the floor, i.e. Materials and their thickness. If there are wooden logs on the beams, then the load from their weight can be taken into account.
You can also set the load from the floor manually, if it is known in advance.
3. Step beams.
4. Span.
5. Wood species.
6. Wood grade
7. Impregnation with flame retardants.
Indicated for wooden beams subjected to deep impregnation with fire retardants under pressure.
8. Humidity of air.
Humidity of air at which wooden beams will be operated.
9. Height of beam section (h).
10. Beam cross-sectional width (b).
The application is useful in the design and construction of an apartment house, cottage, villa, bath, utility rooms and other buildings.
