The application is to calculate the initial parameters to be placed in the injection machine, injection molding, plastic injection, polymer injection such as:
- Cushion of mass (cm3) or (mm).
- Closing force necessary to close the mold (kN).
- Cooling time according to the thickness of the piece and the material (s).
- Volume to inject (cm3) or stroke (mm).
- Maximum dosing speed (rpm and mm / s) and maximum back pressure (bar)
- Temperatures according to the material (zone of the barrel, the hopper and the ejection of the pieces).
- Drying conditions for materials that require drying.
You can also calculate some values always used in the plastics industry such as:
- Production capacity (according to the cycle time, number of cavities and production efficiency).
- Capacity of an injection machine (Volume in cm3 or mm that is recommended to inject according to the material to be injected, diameter and the L / D ratio of the spindle).
- Injection time (The time it takes to produce a required quantity depending on the number of cavities enabled and the efficiency of the machine).
In the full version:
FULL version link: https://play.google.com/store/apps/details?id=com.cpplast.cpplast.full
Additional features of the FULL version:
You can calculate some values always used in the injection of plastic such as:
- Production capacity (according to the cycle time, number of cavities and production efficiency).
- Capacity of an injection machine (Volume in cm3 or mm that is recommended to inject according to the material to be injected, diameter and the L / D ratio of the spindle).
- Injection time (The time it takes to produce a required quantity depending on the number of cavities enabled and the efficiency of the machine).
You can also:
- Save the calculations made.
- Send the calculations made to whoever you want.
- Access to an injection molding course.
- Access correction conditions for injection defects.
Any questions or suggestions please write to centroperuanodelplastico@gmail.com
Atte
Peruvian Plastic Center
- Cushion of mass (cm3) or (mm).
- Closing force necessary to close the mold (kN).
- Cooling time according to the thickness of the piece and the material (s).
- Volume to inject (cm3) or stroke (mm).
- Maximum dosing speed (rpm and mm / s) and maximum back pressure (bar)
- Temperatures according to the material (zone of the barrel, the hopper and the ejection of the pieces).
- Drying conditions for materials that require drying.
You can also calculate some values always used in the plastics industry such as:
- Production capacity (according to the cycle time, number of cavities and production efficiency).
- Capacity of an injection machine (Volume in cm3 or mm that is recommended to inject according to the material to be injected, diameter and the L / D ratio of the spindle).
- Injection time (The time it takes to produce a required quantity depending on the number of cavities enabled and the efficiency of the machine).
In the full version:
FULL version link: https://play.google.com/store/apps/details?id=com.cpplast.cpplast.full
Additional features of the FULL version:
You can calculate some values always used in the injection of plastic such as:
- Production capacity (according to the cycle time, number of cavities and production efficiency).
- Capacity of an injection machine (Volume in cm3 or mm that is recommended to inject according to the material to be injected, diameter and the L / D ratio of the spindle).
- Injection time (The time it takes to produce a required quantity depending on the number of cavities enabled and the efficiency of the machine).
You can also:
- Save the calculations made.
- Send the calculations made to whoever you want.
- Access to an injection molding course.
- Access correction conditions for injection defects.
Any questions or suggestions please write to centroperuanodelplastico@gmail.com
Atte
Peruvian Plastic Center
Show More
