Discover the ranges of OMELCOM intervention aids.
Optimize your interventions on copper (xDSL) and optical (FTTH - FTTx) lines using the new connected equipment developed by OMELCOM.
EASYLOOP is a connected copper line looper (Bluetooth + 2G / 3G / 4G). Connected to a point on the local copper loop, it allows up to 4 lines to be looped, with setting to a reference potential, to carry out measurements and determine pair faults in a cable.
The loop control is carried out remotely from your smartphone via the EASYTOOLS application, avoiding many back and forth trips to the intervention technicians.
EASYLOCS is a connected optical fault locator (Bluetooth + 2G / 3G / 4G) and secure. It is equipped with 2 independent red laser sources at 650 nm, with variable power (adjustable from 1mW to 30mW).
Connect to your EASYLOCS to simplify your optical continuity tests for fiber optic network deployments, recipes and audits.
Turn your lasers on and off from your smartphone via the EASYTOOLS application, adjust their powers remotely, for increased efficiency of interventions, in complete safety for technicians and subscribers.
CONNECT TO YOUR EASYLOOP AND / OR YOUR EASYLOCS
Pair your EASYLOOP and EASYLOCS tools with your smartphone via Bluetooth.
Track their connection and charge status.
REMOTE YOUR EQUIPMENT.
For EASYLOOP:
Loop off the connected pairs, take your measurements, identify faults and restore xDSL services.
Save your battery by automatically turning off your device when not in use, program the device to standalone mode, via the EASYTOOLS application.
For EASYLOCS:
Adjust the power of your lasers between 1 and 30 mW while respecting the safety rules in force (wearing of protective glasses with pairing of the telescope module)
turn on a laser, flash them, adjust the flashing speeds, secure the place of emission by switching off the laser sources remotely (at subscribers for example), save your battery by automatically switching off your device when it is not not used via the EASYTOOLS app.
Optimize your interventions on copper (xDSL) and optical (FTTH - FTTx) lines using the new connected equipment developed by OMELCOM.
EASYLOOP is a connected copper line looper (Bluetooth + 2G / 3G / 4G). Connected to a point on the local copper loop, it allows up to 4 lines to be looped, with setting to a reference potential, to carry out measurements and determine pair faults in a cable.
The loop control is carried out remotely from your smartphone via the EASYTOOLS application, avoiding many back and forth trips to the intervention technicians.
EASYLOCS is a connected optical fault locator (Bluetooth + 2G / 3G / 4G) and secure. It is equipped with 2 independent red laser sources at 650 nm, with variable power (adjustable from 1mW to 30mW).
Connect to your EASYLOCS to simplify your optical continuity tests for fiber optic network deployments, recipes and audits.
Turn your lasers on and off from your smartphone via the EASYTOOLS application, adjust their powers remotely, for increased efficiency of interventions, in complete safety for technicians and subscribers.
CONNECT TO YOUR EASYLOOP AND / OR YOUR EASYLOCS
Pair your EASYLOOP and EASYLOCS tools with your smartphone via Bluetooth.
Track their connection and charge status.
REMOTE YOUR EQUIPMENT.
For EASYLOOP:
Loop off the connected pairs, take your measurements, identify faults and restore xDSL services.
Save your battery by automatically turning off your device when not in use, program the device to standalone mode, via the EASYTOOLS application.
For EASYLOCS:
Adjust the power of your lasers between 1 and 30 mW while respecting the safety rules in force (wearing of protective glasses with pairing of the telescope module)
turn on a laser, flash them, adjust the flashing speeds, secure the place of emission by switching off the laser sources remotely (at subscribers for example), save your battery by automatically switching off your device when it is not not used via the EASYTOOLS app.
Show More
