AppRecs review analysis
AppRecs rating 3.0. Trustworthiness 0 out of 100. Review manipulation risk 0 out of 100. Based on a review sample analyzed.
★★★☆☆
3.0
AppRecs Rating
Ratings breakdown
5 star
20%
4 star
20%
3 star
20%
2 star
20%
1 star
20%
About Digi XBee Mobile
The Digi XBee Mobile app allows you to connect and configure Digi’s XBee 3 devices with Bluetooth Low Energy support. This is what the application allows you to do so far:
- Get started with your XBee 3 BLE devices through a set of built-in demos for different use cases.
- Look for and connect to nearby XBee 3 BLE devices.
- Get basic information from the device and the firmware version it is running.
- List all the configuration categories and settings of the firmware running in the XBee 3 device.
- Read and change the value of any firmware setting.
- Update the firmware of the device remotely (not available for XBee 3 Cellular devices).
- Send and receive data between the XBee local interfaces (serial port, MicroPython and Bluetooth Low Energy).
- Perform a remote reset of the device.
- Provision XBee 3 devices and XBee Gateways in Digi Remote Manager.
- Get started with your XBee 3 BLE devices through a set of built-in demos for different use cases.
- Look for and connect to nearby XBee 3 BLE devices.
- Get basic information from the device and the firmware version it is running.
- List all the configuration categories and settings of the firmware running in the XBee 3 device.
- Read and change the value of any firmware setting.
- Update the firmware of the device remotely (not available for XBee 3 Cellular devices).
- Send and receive data between the XBee local interfaces (serial port, MicroPython and Bluetooth Low Energy).
- Perform a remote reset of the device.
- Provision XBee 3 devices and XBee Gateways in Digi Remote Manager.
Digi XBee Mobile Screenshots
Tap to Rate:
