AppRecs review analysis
AppRecs rating 3.7. Trustworthiness 68 out of 100. Review manipulation risk 20 out of 100. Based on a review sample analyzed.
★★★☆☆
3.7
AppRecs Rating
Ratings breakdown
5 star
0%
4 star
50%
3 star
0%
2 star
50%
1 star
0%
What to know
✓
Low review manipulation risk
20% review manipulation risk
About RadBeacon E
The RadBeacon app from Radius Networks requires an iPhone running iOS 8 or higher and equipped with Bluetooth 4.0 capabilities.
With the RadBeacon app you can scan for nearby configurable Radius Networks Enterprise beacons. Once discovered, you can display each beacon's operating settings and make modifications to those settings.
Features:
- Scan for RadBeacon E beacons
- Configure beacons with up to five advertising slots
- Support for beacon types including iBeacon, AltBeacon, Eddystone UID, and Eddystone URL
- Manage and use keys to commit changes to beacons.
Beacon hardware compatibility:
- RadBeacon E4
- RadBeacon E8
RadBeacon E Screenshots
Tap to Rate:
Reviews for RadBeacon E
tassadda
App is great
Much more configurable items than the older app, Radbeacon, eg, even channels. Crashed sometimes
Holosynthetic
Unstable iBeacon Configuration
I’ve been using this app to configure Radius Chip beacons with the iBeacon protocol. The app makes it extremely difficult to set the measured power of the beacon. Sometimes it works, but most of the time it doesn’t. The app does not make it clear to the user when the measured power is properly configured on the beacon. This bug is a concern due to the fact that iOS uses the measured power to properly calculate distance to the beacon. The only way I was able to verify when the measured power was applied successfully was to use a custom built app using Apple’s CoreLocation to range the beacon. Once the accuracy(distance) averaged to 1m at the RSSI I set in the RadBeacon app, I knew it was successful.
