This application helps you design automated control systems using Raspberry Pi (3/4).
To get started you need a Raspberry Pi version 3 or 4 circuit board (supports Bluetooth LTE). And a Micro SD memory card.
Step 1: Download the .img file contain Rabian OS and Agrinanite server. Then burn it to memory card.
- Agrinanite.7z : https://1drv.ms/u/s!Agzua2hfMqZyqKIZuwhsa-GcnCVr2w?e=pqme0t
- Agrinanite.zip: https://1drv.ms/u/s!Agzua2hfMqZyqKIYFIuFzDuNyDM7wg?e=SfApJh
- First time pin: 75202
After starting up your Raspberry Pi is ready.
Step 2: Run the application (make sure you enable bluetooth and allow application to use), select the device from the device list.
Step 3: Create the design
Step 4: Load the design into the device.
Limitations: The current version only supports turn GPIO on/off , other functions will be upgraded soon.
To get started you need a Raspberry Pi version 3 or 4 circuit board (supports Bluetooth LTE). And a Micro SD memory card.
Step 1: Download the .img file contain Rabian OS and Agrinanite server. Then burn it to memory card.
- Agrinanite.7z : https://1drv.ms/u/s!Agzua2hfMqZyqKIZuwhsa-GcnCVr2w?e=pqme0t
- Agrinanite.zip: https://1drv.ms/u/s!Agzua2hfMqZyqKIYFIuFzDuNyDM7wg?e=SfApJh
- First time pin: 75202
After starting up your Raspberry Pi is ready.
Step 2: Run the application (make sure you enable bluetooth and allow application to use), select the device from the device list.
Step 3: Create the design
Step 4: Load the design into the device.
Limitations: The current version only supports turn GPIO on/off , other functions will be upgraded soon.
Show More
