In this app, you can simulate radio wave signals to calibrate a radio-controlled watch by placing it near your device's speakers. Includes support for multiple signal types, adjustable signal strength, and user instructions.
AppRecs review analysis
AppRecs rating 4.1. Trustworthiness 81 out of 100. Review manipulation risk 24 out of 100. Based on a review sample analyzed.
★★★★☆
4.1
AppRecs Rating
Ratings breakdown
5 star
82%
4 star
5%
3 star
2%
2 star
1%
1 star
10%
What to know
✓
Low review manipulation risk
24% review manipulation risk
✓
Credible reviews
81% trustworthiness score from analyzed reviews
⚠
Ad complaints
Many low ratings mention excessive ads
About Radio Wave Sync
I have a Casio G-Series radio watch, but it is always unable to receive radio waves from time signal station, so I started to write an application to solve this problem.
After some research, I finally wrote this application, which can perfectly simulate the timing signal and happily calibrate the time.
Usage method:
1. Adjust the volume of iPhone / iPad to the maximum.
2. Switch the radio controlled watch / clock to manual wave receiving mode.
3. Click the "start" button.
4. Place the watch / clock near the iPhone / iPad speakers.
5. The synchronization process generally takes 3-10 minutes, please wait patiently.
Matters needing attention:
1. Please try to use the software in a quiet environment to avoid signal interference.
2. The volume of the mobile phone must be adjusted to the maximum. It's too small and the effect is not good.
Characteristic:
1. Supports simulation of all types of Time Wave Signal:
* China BPC
* USA WWVB
* Japan JJY40 / JJY60
* Germany DCF77
* British MSF
2. The unique "Beast Mode" provides higher frequency simulation signals and faster sync.
Contact information:
Please contact me if you have any use questions
*QQ: 3364918353
*Email: 3364918353@qq.com
After some research, I finally wrote this application, which can perfectly simulate the timing signal and happily calibrate the time.
Usage method:
1. Adjust the volume of iPhone / iPad to the maximum.
2. Switch the radio controlled watch / clock to manual wave receiving mode.
3. Click the "start" button.
4. Place the watch / clock near the iPhone / iPad speakers.
5. The synchronization process generally takes 3-10 minutes, please wait patiently.
Matters needing attention:
1. Please try to use the software in a quiet environment to avoid signal interference.
2. The volume of the mobile phone must be adjusted to the maximum. It's too small and the effect is not good.
Characteristic:
1. Supports simulation of all types of Time Wave Signal:
* China BPC
* USA WWVB
* Japan JJY40 / JJY60
* Germany DCF77
* British MSF
2. The unique "Beast Mode" provides higher frequency simulation signals and faster sync.
Contact information:
Please contact me if you have any use questions
*QQ: 3364918353
*Email: 3364918353@qq.com
