AppRecs review analysis
AppRecs rating 3.1. Trustworthiness 80 out of 100. Review manipulation risk 25 out of 100. Based on a review sample analyzed.
★★★☆☆
3.1
AppRecs Rating
Ratings breakdown
5 star
50%
4 star
0%
3 star
0%
2 star
14%
1 star
36%
What to know
✓
Low review manipulation risk
25% review manipulation risk
✓
Credible reviews
80% trustworthiness score from analyzed reviews
About KODAK MEMO
[How to Use]
1. Make sure you recharge the printer before you use it.
2. Make sure the Adapter is connected properly.
3. Turn on the printer
4. Go to the Bluetooth setting and find the printer’s MAC address.
The MAC address is placed inside the printer’s door
If you purchased a Dock Printer, dock your smartphone at the pin on top of the printer or find the MAC address on the downside of the printer to connect the device to Bluetooth.
5. Select an image from the Gallery or take a photo with your smartphone.
6. Once the image has been selected, edit the image with your personal preference.
7. Now press the print button located on top of the printer when editing is completed.
8. When you print for the first time, you may need to update the firmware. Please follow the instructions shown on the screen of your smartphone.
9. It will take about a minute to fully print. Please do not pull the photo until it is completely printed.
1. Make sure you recharge the printer before you use it.
2. Make sure the Adapter is connected properly.
3. Turn on the printer
4. Go to the Bluetooth setting and find the printer’s MAC address.
The MAC address is placed inside the printer’s door
If you purchased a Dock Printer, dock your smartphone at the pin on top of the printer or find the MAC address on the downside of the printer to connect the device to Bluetooth.
5. Select an image from the Gallery or take a photo with your smartphone.
6. Once the image has been selected, edit the image with your personal preference.
7. Now press the print button located on top of the printer when editing is completed.
8. When you print for the first time, you may need to update the firmware. Please follow the instructions shown on the screen of your smartphone.
9. It will take about a minute to fully print. Please do not pull the photo until it is completely printed.
Tap to Rate:
Reviews for KODAK MEMO
Mikeruhlin
Decent hardware, terrible app
This app has absolutely one of the worst user interfaces I’ve ever seen. It’s clear that Kodak attempted to save money by outsourcing development to the lowest bidder, but no matter how low the price was, they still probably got less than what they paid for.
NewsJunkie555
Don’t buy!
The app is terrible. The interface is not intuitive. It’s the worst. Not worth the money for sure.
