The program for voice control of all appliances in the house.
Voice control system consists of two basic modules, Android phone and Arduino.
Saying the voice command, Android Bluetooth phone sends a command to the Bluetooth Module HC-05 for Arduino,
Arduino receives the command and executes any action that you will register in the sketch.
Instructions:
After the first run of the program (v1 Voice Control Bluetooth Arduino), click on "settings", you go to the settings menu of your voice, in the voice settings window click on the "Please click and tell", a window will appear with a microphone with an inscription saying , say any word, the word is recognized and will appear in the upper window, press any button that says "Change Voice command №", and your voice command is saved in non-volatile memory cell, and will be linked to the button.
The button shows the text of your voice commands in parentheses, for example (COW), program the same way, and the other buttons.
Next, click on "settings", you go to the settings menu of your Bluetooth commands in the Bluetooth settings, commands, program any of your Bluetooth commands in the same way as the voice commands.
Next, click on "settings", you will go out the window controls.
Note: The pre-log with a Bluetooth device after authentication, Bluetooth in the phone can be turned off, the program (v1 Voice Control Bluetooth Arduino), itself each time the offer to include Bluetooth in the phone when it was turned off.
In the control, press the red button "Please select the bluetooth device", will open a window with the names of Bluetooth devices with which you have had authorization, select the desired device, the program will establish a connection with the device.
The red button will change color to blue, and appears, Bluetooth command MAC-address and name of the device.
Next, click on the "Please click and tell" and say your command, go to the appropriate Bluetooth Arduino team.
Also, speech recognition, you can start using the Accelerometer Sensor, that is raised from the bottom of the phone, you will start speech recognition.
It is also possible to run car speech recognition.
Accelerometer Sensor and modes (auto voice recognition), you can activate by pressing the appropriate button.
I made a detailed video instructions in the description there is a link to a video on the sketch for the Arduino.
Voice control system consists of two basic modules, Android phone and Arduino.
Saying the voice command, Android Bluetooth phone sends a command to the Bluetooth Module HC-05 for Arduino,
Arduino receives the command and executes any action that you will register in the sketch.
Instructions:
After the first run of the program (v1 Voice Control Bluetooth Arduino), click on "settings", you go to the settings menu of your voice, in the voice settings window click on the "Please click and tell", a window will appear with a microphone with an inscription saying , say any word, the word is recognized and will appear in the upper window, press any button that says "Change Voice command №", and your voice command is saved in non-volatile memory cell, and will be linked to the button.
The button shows the text of your voice commands in parentheses, for example (COW), program the same way, and the other buttons.
Next, click on "settings", you go to the settings menu of your Bluetooth commands in the Bluetooth settings, commands, program any of your Bluetooth commands in the same way as the voice commands.
Next, click on "settings", you will go out the window controls.
Note: The pre-log with a Bluetooth device after authentication, Bluetooth in the phone can be turned off, the program (v1 Voice Control Bluetooth Arduino), itself each time the offer to include Bluetooth in the phone when it was turned off.
In the control, press the red button "Please select the bluetooth device", will open a window with the names of Bluetooth devices with which you have had authorization, select the desired device, the program will establish a connection with the device.
The red button will change color to blue, and appears, Bluetooth command MAC-address and name of the device.
Next, click on the "Please click and tell" and say your command, go to the appropriate Bluetooth Arduino team.
Also, speech recognition, you can start using the Accelerometer Sensor, that is raised from the bottom of the phone, you will start speech recognition.
It is also possible to run car speech recognition.
Accelerometer Sensor and modes (auto voice recognition), you can activate by pressing the appropriate button.
I made a detailed video instructions in the description there is a link to a video on the sketch for the Arduino.
Show More
