Searching for a smartphone B
"The smartphone went somewhere !?"
For such a case, install it on another smartphone, pair it , start it, and make a sound / vibration with Bluetooth connection only . You will be able to and you may be able to find a smartphone you can't find.
Sounds "sound ♪" and "vibration" by remote control at a short distance.
Because it uses a Bluetooth connection, it can be used as long as the communication distance can be reached even if the smartphone communication is not connected to the base station or Wi-Fi.
・ Communication is not possible due to a disaster (phone cannot ring)
・ There are so many people and communication is congested.
・ When a communication failure occurs
Please use it at such times!
・ When you can't find where you put your smartphone in your house or room
・ When you want to alarm / call / wake up a family member in a remote room
・ When you want to search for a partner in a crowd or in rubble
・ Place an unnecessary smartphone at the entrance for crime prevention and sound an alarm remotely.
・ Be surprised by vibrating by remote control
・ When there is a case where it is hidden in the vicinity due to theft or mischief
Preparation is required as some prerequisites. (it's simple)
Please make the following preparations before using.
・ Keep the smartphone to be searched in the "paired" state on the Android OS.
(Please follow your smartphone for detailed pairing method)
・ Keep the smartphone's Bluetooth in the "ON" state at all times
・ Install "Smartphone Search B" on both the smartphone to be searched and the smartphone to be searched.
・ Set "Smartphone Search B" to the reception service activated state on the smartphone to be searched.
(It starts automatically in conjunction with the start of the smartphone. It also starts by starting the application. If the icon is displayed in the notification bar, the reception service is in the start state. The reception service is completely started from the status bar. If you want to quit, you can quit by pressing and holding the power button of the app.)
It was
0. Launch the app
Tap the icon to start the app.
1. Confirmation of the device to be searched
It was
The paired devices are displayed page by page in the white screen on the app. Swipe left or right to move to the device you want to check the connection.
2. Prior confirmation of connection with the smartphone to be searched
Tap the update button (update) on the upper right and check if the smartphone to be searched can receive the search command.
When the smartphone to be searched is in a state where it can receive search commands, the rightmost LED on the upper right turns blue, the "connect" character turns blue, and the center button for connecting can be pressed.
3. Connection with the target device
Tap the [Connect C] button.
When the connection with the smartphone to be searched is completed, the center of the LED on the upper right turns green.
Along with this, you will be able to press the disconnect button, sound call / stop button, and vibration call / stop button.
4. Sound / stop the sound of the smartphone to be searched
(You can select the volume, length and pattern by tapping the empty part of the sound column.)
Tap the [♪] button to make a sound.
Tap the [♪ ×] button to stop the sound.
5. Vibrate the smartphone to be searched
(Tap an empty area in the vibration column to select the length and pattern.)
Tap the [⚡] button to sound the vibration.
Tap the [⚡ ×] button to stop the vibration.
>>> Find the smartphone you are looking for here <<<
6. Stop as soon as you find it
Start the app on the smartphone you found and press "Communicating" at the top of the screen to stop.
The app can be started from the status bar as well as the icon.
The message may be stopped from the sender.
7. Press power to close the app
Tap the power button at the top right of the screen to exit the app.
* If you press and hold it, you can stop the reception service, but you will not be able to receive remote control.
・ Sound / vibration may not be heard in silent mode on Android 5.0.
・ It may operate unexpectedly when the Bluetooth connection is unstable.
In that case, turn off the Bluetooth function of the smartphone, restart the application again, turn Bluetooth back on, and then try again.
* This application is free (advertisements will be displayed).
* We do not perform any information collection function or external data communication (other than advertising).
Developed in @ Japan & ALL Japan.
-Acknowledgments-
Everyone who cooperated
Thank you for your support while you are busy.
Thank you for taking this opportunity.
-Contributing to society through work-
PDS PIS Innovation Lab
"The smartphone went somewhere !?"
For such a case, install it on another smartphone, pair it , start it, and make a sound / vibration with Bluetooth connection only . You will be able to and you may be able to find a smartphone you can't find.
Sounds "sound ♪" and "vibration" by remote control at a short distance.
Because it uses a Bluetooth connection, it can be used as long as the communication distance can be reached even if the smartphone communication is not connected to the base station or Wi-Fi.
・ Communication is not possible due to a disaster (phone cannot ring)
・ There are so many people and communication is congested.
・ When a communication failure occurs
Please use it at such times!
・ When you can't find where you put your smartphone in your house or room
・ When you want to alarm / call / wake up a family member in a remote room
・ When you want to search for a partner in a crowd or in rubble
・ Place an unnecessary smartphone at the entrance for crime prevention and sound an alarm remotely.
・ Be surprised by vibrating by remote control
・ When there is a case where it is hidden in the vicinity due to theft or mischief
Preparation is required as some prerequisites. (it's simple)
Please make the following preparations before using.
・ Keep the smartphone to be searched in the "paired" state on the Android OS.
(Please follow your smartphone for detailed pairing method)
・ Keep the smartphone's Bluetooth in the "ON" state at all times
・ Install "Smartphone Search B" on both the smartphone to be searched and the smartphone to be searched.
・ Set "Smartphone Search B" to the reception service activated state on the smartphone to be searched.
(It starts automatically in conjunction with the start of the smartphone. It also starts by starting the application. If the icon is displayed in the notification bar, the reception service is in the start state. The reception service is completely started from the status bar. If you want to quit, you can quit by pressing and holding the power button of the app.)
It was
0. Launch the app
Tap the icon to start the app.
1. Confirmation of the device to be searched
It was
The paired devices are displayed page by page in the white screen on the app. Swipe left or right to move to the device you want to check the connection.
2. Prior confirmation of connection with the smartphone to be searched
Tap the update button (update) on the upper right and check if the smartphone to be searched can receive the search command.
When the smartphone to be searched is in a state where it can receive search commands, the rightmost LED on the upper right turns blue, the "connect" character turns blue, and the center button for connecting can be pressed.
3. Connection with the target device
Tap the [Connect C] button.
When the connection with the smartphone to be searched is completed, the center of the LED on the upper right turns green.
Along with this, you will be able to press the disconnect button, sound call / stop button, and vibration call / stop button.
4. Sound / stop the sound of the smartphone to be searched
(You can select the volume, length and pattern by tapping the empty part of the sound column.)
Tap the [♪] button to make a sound.
Tap the [♪ ×] button to stop the sound.
5. Vibrate the smartphone to be searched
(Tap an empty area in the vibration column to select the length and pattern.)
Tap the [⚡] button to sound the vibration.
Tap the [⚡ ×] button to stop the vibration.
>>> Find the smartphone you are looking for here <<<
6. Stop as soon as you find it
Start the app on the smartphone you found and press "Communicating" at the top of the screen to stop.
The app can be started from the status bar as well as the icon.
The message may be stopped from the sender.
7. Press power to close the app
Tap the power button at the top right of the screen to exit the app.
* If you press and hold it, you can stop the reception service, but you will not be able to receive remote control.
・ Sound / vibration may not be heard in silent mode on Android 5.0.
・ It may operate unexpectedly when the Bluetooth connection is unstable.
In that case, turn off the Bluetooth function of the smartphone, restart the application again, turn Bluetooth back on, and then try again.
* This application is free (advertisements will be displayed).
* We do not perform any information collection function or external data communication (other than advertising).
Developed in @ Japan & ALL Japan.
-Acknowledgments-
Everyone who cooperated
Thank you for your support while you are busy.
Thank you for taking this opportunity.
-Contributing to society through work-
PDS PIS Innovation Lab
Show More
![暇つぶしタップゲーアプリ[たたたた]連打,16連射 icon](https://apprecs.org/gp/img/icons/webp/150/jp.co.pdscad.pis.tatatata/lA1aTZw-q5gBgN395cmA0l8NAAnJFwTkyDV_fMbDPcs-icon "暇つぶしタップゲーアプリ[たたたた]連打,16連射"){kind=icon}