AppRecs review analysis
AppRecs rating 1.1. Trustworthiness 77 out of 100. Review manipulation risk 21 out of 100. Based on a review sample analyzed.
★☆☆☆☆
1.1
AppRecs Rating
Ratings breakdown
5 star
13%
4 star
4%
3 star
13%
2 star
13%
1 star
57%
What to know
✓
Low review manipulation risk
21% review manipulation risk
✓
Credible reviews
77% trustworthiness score from analyzed reviews
⚠
Mixed user feedback
Average 1.0★ rating suggests room for improvement
About MultiGauge
Compatible Hardware:
Multi Gauge Link
SM-PRO - Fluid Temp, Exhaust Gas Temp, Air Intake Temp, Fluid Pressure, Vac/Boost
SM-AFR - Wideband Air/Fuel Ratio Sensor Module
Compatible Hardware Combinations:
SM-AFR + MultiGauge Link.
SM-Vac/Boost + MultiGauge Link.
SM-AFR + SM-Vac/Boost + MultiGauge Link.
SM-PRO + SM-AFR + MultiGauge Link
SM-PRO + MultiGauge Link
SM-Pro is a combined sensor module for accurately measuring Vac/Boost, Exhaust Gas Temperature, Air Intake Temperature, Fluid (Oil/Water) Temperature, and Fluid Pressure. Includes genuine Honeywell 3Bar Vac/Boost sensor (built-in), wires/connectors for digital interface with DM-6, DM-100/200, MultiGauge Link. Also includes analog outputs for interfacing with 3rd party ECU's and data loggers.
The SM-AFR Gen4 Sensor Module is a tuner grade Bosch LSU 4.9 wideband oxygen sensor controller with digital/analog outputs for 3rd interface. Accurately reads the air/fuel ratio of any internal combustion from 0.68 Lambda to 1.36 Lambda (10:1 - 20:1 AFR *Gasoline). Fully plug and play, no sensor calibration is required. Compatible with Gasoline, Diesel, Ethanol, Methanol, E85, LPG, CNG. Accurate to 0.1AFR with less than 100mS reaction time from rail to rail. Advanced sensor health monitoring, displays oxygen sensor health and reaction time when connected to DM-6 gauge or to your smartphone via the Multi Gauge Link interface.
The SM-Vac/Boost Sensor Module accurately measures the vacuum pressure and boost pressure of any intake manifold. This is ideal for turbo and supercharged applications where monitoring the intake pressure is vital. The Vacuum / Boost Sensor Module can also be used as a stand alone unit capable of interfacing with 3rd party hardware where both the digital output and the analog output are available simultaneously. Its measurement range is 30.5 inHg to 30 PSI or 760 mmHg to 2.11 Kg/cm^2. Connect this sensor module via the Multi Gauge Link interface for a boost gauge on your smartphone.
For more information visit www.plxdevices.com
MultiGauge Screenshots
Tap to Rate:
Reviews for MultiGauge
Richard He’d
Worthless
Installed app and it worked fine on android. Now it opens and connects then immediately closes out with no error message or anything. Open app again and same thing, uninstalled.
Robfzz
Terrible product
PLX's mission statement is "to design the world's most innovative products and deliver a world class customer experience” PLX Multigauge falls incredible short of that goal. Dealt with their support team for more than a month, trying different IOS devices and IOS releases. At best, I can get about three seconds of data before the app freezes (the controller continues to put out the correct voltage levels). Sent the unit back to PLX, and they reported that “it worked perfectly”. Apparently they don’t consider the software to be part of their product. An awful experience, time lost and money down the drain.
