AppRecs review analysis
AppRecs rating 2.1. Trustworthiness 76 out of 100. Review manipulation risk 23 out of 100. Based on a review sample analyzed.
★★☆☆☆
2.1
AppRecs Rating
Ratings breakdown
5 star
13%
4 star
7%
3 star
13%
2 star
0%
1 star
67%
What to know
✓
Low review manipulation risk
23% review manipulation risk
✓
Credible reviews
76% trustworthiness score from analyzed reviews
⚠
Mixed user feedback
Average 2.0★ rating suggests room for improvement
About RedVision by REDARC
Through the RedVision App®, when paired with RedVision enabled REDARC hardware, you may be able to;
Monitor battery level, temperature and voltage monitoring
Monitor battery state of charge and charge rates
Control devices such as lights, water pumps, compressors and inverters
Automated control of multiple devices
Monitor ambient temperature
Monitor tank levels
Check System diagnostics
Complete Firmware updates
The exact mix of available functions will depend on your hardware setup.
With RedVision® it’s easy to keep an eye on what’s important. For complete control and monitoring at your fingertips, download the RedVision App® now.
RedVision by REDARC Screenshots
Tap to Rate:
Reviews for RedVision by REDARC
Missedoutfan
App settings/limited solar data/no export
Hoping for improvements to make this useful. 1. Each time you open the app, it reverts back to Celsius units, and you have to reset the app settings change back to Fahrenheit units. But it doesn’t save this app settings change when you close the app or the app looses connection. So every time you open the app it resets to Celsius, and you have to under settings select Fahrenheit units again. 2. You only get daily solar data, and not hourly solar data like you do for battery state of charge. This makes it hard to troubleshoot or monitor your solar performance. You also only get 8 days of solar total production data. For state of charge of the battery you get hourly data for the last 24 hrs, and then 30 days of daily sum data. It would be nice to get hourly data for solar for the past 24 hours too. It would be especially helpful to have the hourly data not just for the past 24 hours, but for past days for not only solar, but also state of charge, so you can 1) troubleshoot, 2)monitor consumption to manage use, 3)track solar performance. 3. I see no way to export the solar and state of charge data. It would be nice to be able to export the data so you can have historic data to troubleshoot, manage the performance, track battery health, and track consumption needs by knowing the history. Especially since you only get access to the last 30 days of daily state of battery charge and 8 days of total daily solar production.
Bryan1019
Worked great until it didn’t.
It worked wonderful for almost a year. All of a sudden it won’t find or connect to the app. Makes no sense and can’t figure it out. I’ve uninstalled and installed countless times. Tried the QR code on the hard mount display that still works & can’t get the app to find anything.
