WalkRecord Plus Functional Description
You can record and save (route, distance, time) of movement such as walking and jogging in one day units, and play back later.
The full text of Functional Description is here.
( http://ysnbisgk.life.coocan.jp/walkinglocusplus.html )
*** please note ***
This app works on iOS 11.0 and above.
When you start up for the first time, please enable "Use location service".
If you do not allow it, the application will end.
Also, turn on "Motion and Fitness" for the pedometer.
In the case of WalkRecord Plus, please turn on this app in iCloud of the device to save the data in iCloud.
● App description
It is an application that displays the movement track using GPS.
The route you walked and moved is recorded with a pin, and it moves at set distance intervals.
The time and distance traveled from the recording start point at each point, latitude , longitude and altitude are displayed at the top of the screen.
There is also a pedometer function that records the number of steps taken and distance and displays them on the screen.
When you click on any pin, the time when the point passes and the distance from the recording start point will be displayed as pin information.
The distance between movement points shows the straight line distance between GPS points, and the movement distance within the set interval is not counted.
if GPS cannot be detected, you may not be able to update the pin, but since distance measurement is automatically restarted from the point where GPS is caught again.
● Function and operation(extract)
The main button functions and operations are as follows.
・ Record / Stop button
Click the [Record / Stop] button to start the location information service (recording), and click it again to stop the location information service.
・ [Setting] button
① Setting the map type
You can switch between standard map and satellite map.
② Address display setting
If you tap any point on the map with the address display ON, the zip code and address of that point will be displayed.
③ Pin color setting
You can choose the pin color (default: red) from 10 colors as needed.
④Pin recording interval setting
Display pins at distance intervals of 50m, 100m, 200m, 500m
It is also possible to record the pin recording interval by time, 30 seconds, or 1 minute.
⑤ Automatic recording stop setting
After starting recording, you can set and record 1H and 2H time to prevent forgetting to press the recording stop button.
This will automatically stop recording after the set time to prevent battery drain
⑥ Speed limit setting
If you set a maximum speed (km / h) when moving and exceed this speed limit, you will be notified with a chime.
・ [Reset/Clear] button
Clear the distance meter to your current position to zero
The recording time from the recording start point can also be cleared to zero.
You can clear the pedometer data (step count and walking distance) to zero.
・ [Playback / delete] button
You can play the recorded data and delete the recorded data by date by selecting the date.
If you select "all" at the top and select "Delete", all the saved data will be deleted.
Select "Location list" to display a list of registered sites that have been registered so far.
・[Record shaped] button
Lists the number of days and pins saved on the title and the date saved in iCloud.
・ Save to iCloud: Upload and save all the data in the app to iCloud
・ Restore from iCloud: Download all data in iCloud and restore in the app
This allows you to share data between iOS devices via iCloud and take over the data when you change devices
・ Pin distance measurement
Select any two pins to see the distance between them
・ Label at the top of the screen
Displays the latitude, longitude and altitude of the current position (pin position)
Displays the distance and time from the recording start point to the current location
The total distance traveled on the day, the number of steps taken, and the walking distance are displayed.
You can record and save (route, distance, time) of movement such as walking and jogging in one day units, and play back later.
The full text of Functional Description is here.
( http://ysnbisgk.life.coocan.jp/walkinglocusplus.html )
*** please note ***
This app works on iOS 11.0 and above.
When you start up for the first time, please enable "Use location service".
If you do not allow it, the application will end.
Also, turn on "Motion and Fitness" for the pedometer.
In the case of WalkRecord Plus, please turn on this app in iCloud of the device to save the data in iCloud.
● App description
It is an application that displays the movement track using GPS.
The route you walked and moved is recorded with a pin, and it moves at set distance intervals.
The time and distance traveled from the recording start point at each point, latitude , longitude and altitude are displayed at the top of the screen.
There is also a pedometer function that records the number of steps taken and distance and displays them on the screen.
When you click on any pin, the time when the point passes and the distance from the recording start point will be displayed as pin information.
The distance between movement points shows the straight line distance between GPS points, and the movement distance within the set interval is not counted.
if GPS cannot be detected, you may not be able to update the pin, but since distance measurement is automatically restarted from the point where GPS is caught again.
● Function and operation(extract)
The main button functions and operations are as follows.
・ Record / Stop button
Click the [Record / Stop] button to start the location information service (recording), and click it again to stop the location information service.
・ [Setting] button
① Setting the map type
You can switch between standard map and satellite map.
② Address display setting
If you tap any point on the map with the address display ON, the zip code and address of that point will be displayed.
③ Pin color setting
You can choose the pin color (default: red) from 10 colors as needed.
④Pin recording interval setting
Display pins at distance intervals of 50m, 100m, 200m, 500m
It is also possible to record the pin recording interval by time, 30 seconds, or 1 minute.
⑤ Automatic recording stop setting
After starting recording, you can set and record 1H and 2H time to prevent forgetting to press the recording stop button.
This will automatically stop recording after the set time to prevent battery drain
⑥ Speed limit setting
If you set a maximum speed (km / h) when moving and exceed this speed limit, you will be notified with a chime.
・ [Reset/Clear] button
Clear the distance meter to your current position to zero
The recording time from the recording start point can also be cleared to zero.
You can clear the pedometer data (step count and walking distance) to zero.
・ [Playback / delete] button
You can play the recorded data and delete the recorded data by date by selecting the date.
If you select "all" at the top and select "Delete", all the saved data will be deleted.
Select "Location list" to display a list of registered sites that have been registered so far.
・[Record shaped] button
Lists the number of days and pins saved on the title and the date saved in iCloud.
・ Save to iCloud: Upload and save all the data in the app to iCloud
・ Restore from iCloud: Download all data in iCloud and restore in the app
This allows you to share data between iOS devices via iCloud and take over the data when you change devices
・ Pin distance measurement
Select any two pins to see the distance between them
・ Label at the top of the screen
Displays the latitude, longitude and altitude of the current position (pin position)
Displays the distance and time from the recording start point to the current location
The total distance traveled on the day, the number of steps taken, and the walking distance are displayed.
Show More
