TOURATECH Connect is the companion application for TOURATECH Connect Dongle.
The combination of app and dongle allows access to a whole world of thrilling new driving data.
Show your performance!
Every tour tells its own story.
Now you can analyze every ride in detail with the new TOURATECH CONNECT app.
It provides dozens of interesting informations out of 8 different functional areas. It also helps to keep your eyes on and share your performance as a rider.
The hardware gets the information directly from the CanBus, so it is not effected by the limitations of the ODB2 interface. It is attached there, vehicle-specifically, to existing connection plugs via "Plug'n'Play". Special technical knowledge is not required for this.
You receive information from the following areas:
Engine (gear, speed, ...)
Lighting (turn signals, ...)
Brakes (brake power units, forces, ...)
Switches & levers (states of lever, side stand, ...)
Driving dynamics (acceleration, lean angle, ...)
Extremes (slide and drift duration)
Special functions (gear changes, driving time, rests recommendation, ...)
States (tank filling, ...)
In total, more than 60 values for the operating state of the motorcycle and the driving dynamics. The parameters of many functions are preset, but can be customized by the user.
You can decide yourself which data you want to see, in which size and on which position they are displayed. You can track up to 36 features on your screen at the same time.
TOURATECH CONNECT uses "Bluetooth Low Energy" to guarantee long battery life. Another advantage, other features such as telephony or navigation can be used in parallel.
TOURATECH CONNECT remains permanently connected to the motorcycle and as long as ignition is on, it continuously delivers information to the rider's cell phone - during the ride and afterwards. The system works completely OFFLINE, an Internet connection is not necessary.
61 performance data directly to your smartphone via Bluetooth.
Knowing instead of believing!
New functions "Release 2021/11"
New, additional vehicles
Now available for:
- BMW R 1200 GS from 08/2015
- BMW R 1200 GS Adventure from 08/2015
- BMW R 1200 R from 02/2015
- BMW R 1200 RS all models
- BMW R 1200 RT from 08/2014
- BMW R 1250 GS all models
- BMW R 1250 GS Adventure all models
- BMW R 1250 R all models
- BMW R 1250 RS all models
- BMW R 1250 RT all models
New display function
- Height above sea level
- Inclination for right / left separately
NEW: Recording feature
- Create recording On/Off switch
- Recording overview
- Display of route, distance, time, highest & lowest point
- Recording view with presentation of all display functions active during recording as line graphs with time reference
- Time axis with absolute and relative time
- Graphs with time axis zoom and map with map zoom
- Extended analysis of graphs by categorisation and percentages where useful
- GPX export of the route
- Logbook for all vehicle-specific memory values (maximum values, best values as well as counter values)
NEW: Image sharing feature
- Map can be freely zoomed and moved
- Selection of a data graph
- Adjustment of output format: portrait, landscape, square
NEW: Transfer options
- Export recording files
- Export app data, e.g. as backup when changing mobile phone
NEW: Pin feature
- Graphs can be pinned in portrait format for direct comparison
NEW: Structural improvements
- Labeled mode for all data display fields
- Additional app setting "Remember dongle pin" the pin is saved in the app as "*****" and filled in automatically
- More predefined dashboards and templates
- Enhanced colour design in the design area with a black/white opacity slider
The combination of app and dongle allows access to a whole world of thrilling new driving data.
Show your performance!
Every tour tells its own story.
Now you can analyze every ride in detail with the new TOURATECH CONNECT app.
It provides dozens of interesting informations out of 8 different functional areas. It also helps to keep your eyes on and share your performance as a rider.
The hardware gets the information directly from the CanBus, so it is not effected by the limitations of the ODB2 interface. It is attached there, vehicle-specifically, to existing connection plugs via "Plug'n'Play". Special technical knowledge is not required for this.
You receive information from the following areas:
Engine (gear, speed, ...)
Lighting (turn signals, ...)
Brakes (brake power units, forces, ...)
Switches & levers (states of lever, side stand, ...)
Driving dynamics (acceleration, lean angle, ...)
Extremes (slide and drift duration)
Special functions (gear changes, driving time, rests recommendation, ...)
States (tank filling, ...)
In total, more than 60 values for the operating state of the motorcycle and the driving dynamics. The parameters of many functions are preset, but can be customized by the user.
You can decide yourself which data you want to see, in which size and on which position they are displayed. You can track up to 36 features on your screen at the same time.
TOURATECH CONNECT uses "Bluetooth Low Energy" to guarantee long battery life. Another advantage, other features such as telephony or navigation can be used in parallel.
TOURATECH CONNECT remains permanently connected to the motorcycle and as long as ignition is on, it continuously delivers information to the rider's cell phone - during the ride and afterwards. The system works completely OFFLINE, an Internet connection is not necessary.
61 performance data directly to your smartphone via Bluetooth.
Knowing instead of believing!
New functions "Release 2021/11"
New, additional vehicles
Now available for:
- BMW R 1200 GS from 08/2015
- BMW R 1200 GS Adventure from 08/2015
- BMW R 1200 R from 02/2015
- BMW R 1200 RS all models
- BMW R 1200 RT from 08/2014
- BMW R 1250 GS all models
- BMW R 1250 GS Adventure all models
- BMW R 1250 R all models
- BMW R 1250 RS all models
- BMW R 1250 RT all models
New display function
- Height above sea level
- Inclination for right / left separately
NEW: Recording feature
- Create recording On/Off switch
- Recording overview
- Display of route, distance, time, highest & lowest point
- Recording view with presentation of all display functions active during recording as line graphs with time reference
- Time axis with absolute and relative time
- Graphs with time axis zoom and map with map zoom
- Extended analysis of graphs by categorisation and percentages where useful
- GPX export of the route
- Logbook for all vehicle-specific memory values (maximum values, best values as well as counter values)
NEW: Image sharing feature
- Map can be freely zoomed and moved
- Selection of a data graph
- Adjustment of output format: portrait, landscape, square
NEW: Transfer options
- Export recording files
- Export app data, e.g. as backup when changing mobile phone
NEW: Pin feature
- Graphs can be pinned in portrait format for direct comparison
NEW: Structural improvements
- Labeled mode for all data display fields
- Additional app setting "Remember dongle pin" the pin is saved in the app as "*****" and filled in automatically
- More predefined dashboards and templates
- Enhanced colour design in the design area with a black/white opacity slider
Show More
