AppRecs review analysis
AppRecs rating 1.0. Trustworthiness 0 out of 100. Review manipulation risk 0 out of 100. Based on a review sample analyzed.
★☆☆☆☆
1.0
AppRecs Rating
Ratings breakdown
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
100%
What to know
⚠
Mixed user feedback
Average 1.0★ rating suggests room for improvement
About BatteryCheck
Key features
> Communicates via Bluetooth with smart phones
> Instant real time data - view information including volts and amps, time remaining, temperature, battery status, state of charge and battery health
> Easy installation – no mechanical expertise required
> Works with multiple batteries when in parallel (7Ah-800Ah Battery Bank)
> Internal shunt capacity - 80 amps continuous
> Set automatic alarm warnings via app
> Compatible with any deep cycle 12 or 24V Lead Acid, AGM and Gel 7Ah-800Ah battery
Note: This application will only work if you have a BatteryCheck which can be purchased at TeamBMPRO.com
BatteryCheck Screenshots
Tap to Rate:
Reviews for BatteryCheck
ronbot79
Horrible Bluetooth Support
The idea behind this product is good but the execution falls far short. I have had the battery monitor for almost two years and I'm on my second unit after exchanging the first. They both have the same problem: horrible Bluetooth support. If the Bluetooth connection fails or gets disconnected, there is no way of reconnecting without re-pairing the device. The problem is in order to re-pair the device you have to physically disconnect the battery monitor from power (there is no reset button on it) - this can be a real pain especially if the batteries are in a hard to reach spot. This is the only Bluetooth device I have used where I have had to memorize the pairing code. Further the Bluetooth signal does not work great through a metal trailer (no surprise there) - more than 10 feet away and you're lucky to get any signal. Bottom line - a physically wired battery monitor may be more difficult to install but is much more reliable.
